Tennis National Training Center

Designed by the architect Marc Mimram, the new CNE project included the creation of 5 architectural units which met the stakes of French Tennis Federation. The buildings of the CNE, were moved to a new location. The UHPC was chosen for this building

The Leon Grosse Company requested Sadev know-how for the construction of this building, composed of scales in UHPC. The challenge was to find a solution which can be suitable to the different building shapes.

Sadev equipped 900 blades of an articulated steel hook system, meeting the architect’s requirements (no visible binding on the outside facades) and those of Léon Grosse (a unique system for most configurations, capable to take back the structure’s defects).

More information

Details

Chemin des Posés, 74330 Poisy, France

SADEV

Associated Trend items

Musée de la Romanité - Nîmes, France

An innovative and original architecture imagined by the architect Elizabeth de Portzamparc and made possible thanks to the SADEV expertise.

SADEV, in close collaboration with the glass finisher HEFI, adapted specific pieces to the constraints of such a construction. This technologic achievement is a world premiere and required the use of innovative methods to give life to the project. The support of about 7000 glass panels on a total surface of 2 500 m² was possible thanks to the development of a particula...

More information

SABCO’S GLASS CURVED GUARDRAILS FOR “LES GIROFLÉES” TOWER IN MONACO

These SABCO profiles were tested at 8,500 Pa to resist the high wind loads that a tower of this height located by the sea can encounter.

“LES GIROFLEES” TOWER in MONACO This tower is located in the east of Monaco, in an essentially residential area, near the sea. It is made up of 29 floors (24 floors + 5 underground levels) including 73 apartments, a Family Center, a spa, commercial premises, three swimming pools, two of which are private on the roof of the building, and an underground parking lot with 20...

More information

GLASS FASTENERS FOR STUCTURAL BOLT FACADES – SAINT-GOBAIN TOWER

SADEV has designed and produced the fasteners and their systems of fixing to the structure but also manufactured the swivel fittings according to the Saint-Gobain specifications

A new tower in the Paris skyline. The new headquarters of the Saint-Gobain company was recently built in the heart of the “La Défense” district in Paris. This tower, which rises over 44 levels, was designed by the Valode & Pistre architectural firm. It is distinguished by its remarkable shapes, inspired by a crystal found in the natural environment. The building meets th...

More information

Compare

Remove all

Compare up to 10 products