NEW: water storage reservoir by Alumasc Exterior Building Products

Rainwater Harvesting System Components Rainwater Storage Tank

Stormsaver provides a range of Rainwater Harvesting storage tanks including:

Underground single chamber tank (1,000 - 150,000 litres), incorporating an integrated Vortex Filter

Above ground sectional tank (1,000 - 200,000 litres

Above ground single piece tank either vertical or horizontal (1,000 - 150,000 litres)

To create larger capacities tanks can be linked together with the fittings supplied.

All tanks come with an integrated Vortex Filter, a 180 micron floating suction filter, inlet calmer, pre-moulded inlets and outlets located and orientated to suit local site drainage, a back pressure valve / rodent guard and lockable cover.

Rainwater Header Tank

(Suitable for the non-pressurised system)

The tank has been designed to be compliant with the Water Supply (Water Fittings) Regulations 1999 to protect the integrity of the mains water supply

WRAS compliant non-corrosive tanks

Pre-installed insulation 25mm as standard - 50mm / 75mm on request

Single piece tank. Standard or bespoke dimensions in 100 - 10,000 litres as single piece or 1,000 - 200,000 litres installed as sectional design

Tanks are fitted with level sensors, inlet valves and supplied with a mains water failsafe control valve to provide continuity of supply if power fails

Tanks can be fitted with multiple sections for drain down / maintenance

Multiple header tanks can be incorporated into the building design