NEW: aluminum handrail by FAGERHULT

Installation

Wall or post through separate consoles.

Connection

Each handrail section is supplied with through-wiring 2 x 1.5 mm², designed to be connected to an externally placed LED driver 24 V DC (SELV). Splicing joins for power cables to the handrail are extended inside the handrail.

Design

Body of extruded aluminium, Ø 55 mm. Wall or post bracket and end plate of anodised aluminium. LED mounted in separate extruded aluminium profile incl. lens.

Louvre

Clear disc of extruded PC.

LED-information

4200 K: Ra (CRI) min. 80, L70 50 000 h, MacAdam 5 SDCM

Miscellaneous

Handrail units are delivered ready for continuous installation. Switching or through-wiring to further sections is possible, but limited to a maximum length of 12 m per power point, depending on the choice of driver. For longer systems, power must be supplied to the system from several points. Wall/post mount is prepared for incoming cables. Closing units in the system need to be equipped with end plates (please see accessories). When mounted outdoors, or in damp conditions, the cover strip needs to be placed across the back of the profile and the terminal package used (please see accessories). Voltage drop calculation and cable dimensioning between the driver and handrail must be carried out for longer lengths. The recommended minimum area of cable between the driver and handrail 2 x 1.5 mm² (cable not included).