Home Battery Enclosures: Sheet Metal, Plastic or SuperVIG® Printed Glass Panel?

Home Batteries Are Becoming Part of the Furniture

Q1: Is glass too fragile for a battery enclosure?
A: No. The substrate is toughened glass compliant with GB 15763.2 — the same safety standard used in car side windows and shower doors. It is 4–5× stronger than annealed glass and, if broken, forms small granules without sharp edges. Plastic dents and cracks under impact; toughened glass holds its shape.

Q2: How is the colour applied? Can it peel or fade?
A: Two routes are available. Low-temperature screen printing applies ink to the surface (prototyping, small batches). High-temperature ceramic printing fires ceramic enamel into the glass at 600–700°C during toughening — the colour becomes part of the substrate itself and physically cannot peel or fade.

More information

Details

Lianfengzhen, Liancheng County, Longyan, Fujian, China, 366299

FUJIAN SUPERTECH ADVANCED MATERIAL CO.,LTD.

Associated Trend items

150mm of Rock Wool Becomes 40–60mm. The Prefab Wall, Reinvented

From 200mm Walls to 40mm — Without Losing a Degree

For modular building exports, wall thickness is not an insulation metric — it is a freight-cost metric, a living-space metric, and a durability metric. VAP panels decouple thermal performance from thickness: by evacuating the core inside a hermetically welded stainless-steel shell, they deliver rock-wool-level thermal resistance at 1/3 the thickness, while the sealed met...

More information

Four Layers. One Panel. The Hidden Engineering Behind a Premium Appliance Finish

Why Cheap Panels Become Colour-Matching Nightmares

Appliance panel quality is invisible engineering. Four layers — AF coating, toughened glass, decorative printing, and back-side protection — each tackle a specific failure mode: fingerprints, breakage, fading, and rear corrosion. The manufacturing sequence matters as much as the materials: high-temperature firing destroys the AF layer, and etching solution destroys ink,...

More information

200mm Walls Become 5–20mm. The Modular Home, Reinvented

From Building Site to Car Factory: The Insulation That Makes It Possible

Modular construction’s efficiency gain comes from replacing sequential site work with parallel factory work — but that only works if materials are highly standardised. Conventional fibrous insulation defeats this: it’s bulky, moisture-sensitive, dusty, and short-lived. VAP panels change the physics: by removing gas (the main heat carrier) inside a hermetically sealed sta...

More information

Products associated

opaque glass panel

APPLIANCE Series

Compare

Remove all

Compare up to 10 products