CREA-LITE: Decorative safety glass combining texture and colour

CREA-LITE is obtained by the softening of clear or body-tinted glass. First, starting with a digital photo or file, a mould is prepared with a bespoke texture (maximum 11 mm). The glass is then placed in the mould and heated to a high temperature (around 800 °C). Thermoforming is done progressively, and the glass then takes on the 3D shape of the mould through gravity. The glass is then toughened. CREA-LITE may also be coloured using the glass-printing technique. Powders are applied to the surface and vitrified during the glass oven annealing cycle.

Applications

CREA-LITE is suitable for indoor and outdoor use:

- wall cladding;

- façades, double glazing;

- windows;

- doors;

- fixed or sliding partitions;

- tables, furniture;

- shower cubicles and bath screens;

- signs;

- trophies, decorative objects;

- balustrades and railings;

- floor slabs.

Advantages

- high luminous transmission;

- protection of privacy;

- translucent;

- original bespoke design for each project;

- possibility of 3D relief and printing;

- relief to a maximum difference of 11 mm;

- permanence of texture and colour;

- a broad colour range;

- colour fastness;

- large sizes available;

- safety glass: tempered and heat-soaked;

- possibility of drilling.

Projects using CREA-LITE:

CREA-LITE COLOR stained glass windows in Saint Gatien''s Cathedral, Tours.

LELYSTAD PARKING GARAGE with CREA-LITE COLOR

Netherlands Institute for sound and vision with CREA-LITE COLOR

UNIVERSITY MAASTRICHT THE NETHERLANDS with CREA-LITE COLOR

NAI ROTTERDAM with CREA-LITE COLOR