STAINLESS STEEL SLOT CHANNEL - RIGHT EDGES - FLOOR DRAINS

Entirely made of stainless steel AISI 304 (or 316 upon request), with a thickness of 2 mm,

the channel can be realized both with a “standard” central slot of 20 mm or a “heel proof” slot of 8 mm. The side edges are vertically straight (therefore inot visible when installed in the floor). The body of the channel is 70 mm wide, technically designed to be fully inspected at sight (Inoxsystem® item out of catalogue).

The slot can be in the center or offset from the center to be easily leaned against the wall.

The slot channel with straight edges can be equipped with:

- a siphoned floor drain (also called gully or slump) with square top plate of 150x150 or 200x200 mm, 6 mm thick, overall height of 140 mm, siphoned outlet Ø 63/50 mm and removable filter basket with insect and rat-proof function.

- a floor drain of 80x80 mm without siphoning, with direct outlet Ø 63/50 mm and removable filter basket with insect and rat-proof function.

- Direct outlet Ø 63 mm welded to the channel, without siphoning and without filter basket.

The direction of the outlet can be vertical or horizontal, and it can be positioned at the center,at the head, or in a point of the channel defined by the customer. Grafts can be prepared for flushing the channel throughout inlets of ½" with diffuser.

Important: All Inoxsystem® stainless steel products can be made custom, with construction drawings made in collaboration with our technicians, able to satisfy the widest range of installation requirements.